TUSB212-Q1 Texas instruments

TUSB212-Q1

Уточнить цену

TUSB212-Q1

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The TUSB212-Q1 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel. TUSB212-Q1 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB212-Q1 while HS signals are compensated.Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests.In addition, TUSB212-Q1 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols.

Qualified for Automotive Applications:
- Device Temperature Grade 2: –40°C to 105°C Ambient Operating Temperature
- Device HBM Classification Level H1C
- Device CDM Classification Level C3
Compatible with USB 2.0, OTG 2.0 and BC 1.2
Pin strap or I²C configurable
Support for LS, FS, HS signaling
Ultra-low USB Disconnect and Shutdown Power Consumption
Selectable Signal Gain Via Daisy Chain Device for High Loss Applications
D1P/M and D2P/M Interchangeable and Host/Device Agnostic
Supports up to 5m pre-channel or 2m post-channel Cable Length
- Four Selectable AC Boost Settings Via External Pulldown Resistor
- DC Boost Along With AC Boost for Best Signal Integrity

Type	Redriver
Function	USB 2.0
USB speed (MBits)	480
Number of channels	1
Supply voltage (max) (V)	3.6
Supply voltage (min) (V)	3
Input/ouput voltage (min) (V)	0
Input/ouput voltage (max) (V)	3.6
Configuration	USB 2.0 Single-channel
Features	USB 2.0 Redriver with 4 Meter Cable Redriving Strength Auto Qualified
Rating	Automotive
Operating temperature range (°C)	-40 to 105
Supply current (max) (µA)	30000
ESD HBM (typ) (kV)	2
Bandwidth (MHz)	240