SN74LV8153-Q1 Texas instruments

SN74LV8153-Q1

Уточнить цену

SN74LV8153-Q1

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The SN74LV8153 is a serial-to-parallel data converter. It accepts serial input data and outputs 8-bit parallel data. The automatic data-rate detection feature of the SN74LV8153 eliminates the need for an external oscillator and helps with cost and board real-estate savings. The OUTSEL pin is used to choose between open collector and push-pull outputs. The open-collector option is suitable when this device is used in applications such as LED interface, where high drive current is required. SOUT is the output that acknowledges reception of the serial data. To ensure the high-impedance state during power up or power down, OE should be tied to VCC1 through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Qualified for Automotive Applications
Single-Wire Serial Data Input
Compatible With UART Serial-Data Format
Up to Eight Devices (64-Bit Parallel) Can Share the Same Bus by Using Different Combinations of A0, A1, A2
Up to 40 mA Current Drive in Open-Collector Mode for Driving LEDs
Outputs Can be Configured as Open-Collector or Push-Pull
Internal Oscillator and Counter for Automatic Data-Rate Detection
Output Levels Are Referenced to V_CC2 and Can Be Configured From 3 V to 12 V
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 1000-V Charged-Device Model (C101)

Configuration	Serial-in, Parallel-out
Bits (#)	8
Technology family	LV-A
Supply voltage (min) (V)	3
Supply voltage (max) (V)	5.5
Input type	Schmitt-Trigger
Output type	Push-Pull
Clock frequency (MHz)	0.012
IOL (max) (mA)	40
IOH (max) (mA)	-24
Supply current (max) (µA)	20000
Features	Over-voltage tolerant inputs, Partial power down (Ioff), Standard speed (tpd > 50ns)
Operating temperature range (°C)	-40 to 125
Rating	Automotive