CC1352P Texas instruments

The SimpleLink™CC1352P device is a multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY, Wi-SUN, proprietary systems, including the TI 15.4-Stack (Sub-1 GHz and 2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, smart meters, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include: Multi-band device supporting concurrent multiprotocol for both Sub-1 GHz and 2.4 GHz through a DMM driver. Wide flexibility of protocol stack support in the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK). Enablement of long-range and low-power applications using the integrated +20 dBm high-power amplifier with best-in-class transmit current consumption at 63 mA for Sub-1 GHz and 85 mA for 2.4 GHz operation. Optimized for coin-cell operation at +10 dBm with 22 mA current consumption. Longer battery life wireless applications with low standby current of 0.85 µA and full RAM retention. Industrial temperature ready with lowest standby current of 5 µA at 85°C. Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1 µA system current. Low SER (Soft Error Rate) FIT (Failure-in-time) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events. Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards. Excellent radio sensitivity (-121 dBm) and robustness (selectivity and blocking) performance for SimpleLink™ long-range mode. The CC1352P device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

Protocols	6LoWPAN, Amazon Sidewalk, Bluetooth 5.2 Low Energy, IEEE 802.15.4, MIOTY, Proprietary 2.4 GHz, Thread, Wi-SUN NWP, Wireless M-Bus (T, S, C, N mode), Zigbee
Frequency bands	1069-1329, 2360-2500, 431-527, 861-1054
Type	Wireless MCU
RAM (kByte)	80
Flash memory (kByte)	352
CPU	Arm Cortex-M4
Peripherals	2 SPI, 2 UART, 2 comparators, 4 timers, 8-bit DAC, I2S, Sensor controller
Sensitivity (best) (dBm)	-121
Number of GPIOs	26
Data rate (max) (MBits)	2
Rating	Catalog
Operating temperature range (°C)	-40 to 85