LP8733 Texas instruments

LP8733

Уточнить цену

LP8733

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The LP8733xx is designed to meet the power management requirements in industrial applications. The device has two step-down DC/DC converters (which can be configured as a single dual-phase regulator or two single-phase regulators), two linear regulators, and two general-purpose digital-output signals. The device is controlled by an I2C-compatible serial interface and by an enable signal.The automatic PWM/PFM (AUTO mode) operation together with the automatic phase adding/shedding gives high efficiency over a wide output-current range. The LP8733xx supports remote voltage sensing (differential in dual-phase configuration) to compensate IR drop between the regulator output and the point-of-load (POL), thus improving the accuracy of the output voltage. In addition, the switching clock can be forced to PWM mode and also synchronized to an external clock to minimize the disturbances. The LP8733xx device supports programmable start-up and shutdown delays and sequences including GPO signals synchronized to the enable signal. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the in-rush current.

Device operating temperature range: –40°C to +125°C ambient temperature
Input voltage: 2.8 V to 5.5 V
Two high-efficiency step-down DC/DC converters:
- Output voltage: 0.7 V to 3.36 V
- Maximum output current 3 A per phase
- Adding and shedding auto phase and force multi-phase operations in dual-phase configuration
- Remote differential feedback voltage sensing in dual-phase configuration
- Programmable output-voltage slew rate from 0.5 mV/µs to 10 mV/µs
- 2-MHz switching frequency
- Spread-spectrum mode and phase interleaving for EMI reduction
Two linear regulators:
- Input voltage: 2.5 V to 5.5 V
- Output voltage: 0.8 V to 3.3 V
- Maximum output current 300 mA
Configurable general-purpose output signals (GPO, GPO2)
Interrupt function with programmable masking
Programmable power-good signal (PGOOD)
Output short-circuit and overload protection
Overtemperature warning and protection
Overvoltage protection (OVP) and undervoltage lockout (UVLO)
28-pin, 5-mm × 5-mm VQFN package with wettable flanks

Regulated outputs (#)	4
Vin (min) (V)	2.8
Vin (max) (V)	5.5
Iout (max) (A)	3
Rating	Catalog
Step-down DC/DC controller	0
Step-down DC/DC converter	2
Step-up DC/DC controller	0
Step-up DC/DC converter	0
LDO	2
Iq (typ) (mA)	0.009
Switching frequency (max) (kHz)	2200
Features	Enable pin, I2C control, Power good, Power sequencing, Spread-Spectrum Clock (SSC) Generation, Thermal shutdown, UVLO adjustable
Operating temperature range (°C)	-40 to 125
Processor name	i.MX 8M Mini/Nano
Processor supplier	NXP
Switching frequency (typ) (kHz)	2000
Configurability	Factory programmable, Software configurable