The TPS65175B/C provides a simple and economic power supply solution for a wide variety
of LCD bias applications. The device provides all supply rails needed by a TFT-LCD panel but also 6
gamma references, a supply rail for LVDS support, as well as a Vcom reference. The device also
integrates a VCOM_DAC rail providing the reference for an external non-inverting operational
amplifier input. A 12-Channel Level Shifter is also integrated. The solution is delivered in a
small 7×7 mm QFN package.
The TPS65175B/C provides a simple and economic power supply solution for a wide variety
of LCD bias applications. The device provides all supply rails needed by a TFT-LCD panel.
VCC and RST for the T-Con. VDD
and HVDD for the Source Driver. VGH and
VGL for the Gate Driver or the Level Shifters. A VCOM
operational amplifier is also integrated to provide a common plane reference. The
VGH and VCOM / VCOM_DAC
voltages can be compensated for low and high temperatures. The transition from one programmed value
to another is made using an external thermistor connected to the IC. In addition, a 6-channel Gamma
Buffer as well as a 12-Channel Level Shifter are integrated. All output rails and delay times are
programmable by a two-wire interface: a single BOM (Bill of Material) can cover several panel types
and sizes whose desired output levels can be programmed in production and stored in a non-volatile
memory embedded into the TPS65175B/C. The solution is delivered in a small 7 mm × 7 mm QFN-56
package.
- 8.6V to 14.7V Input Voltage Range
- Boost Converter VDD: 12.7V…19V (6-Bit)
- Integrated Input-to-Output Isolation Switch
- Buck Converter HVDD: VDD Tracking
- Buck Converter VCC: 1.6V...2.0V & 3.0V…3.6V (4-Bit)
- Positive Charge Pump VGH:
- 19V…34V for Low Temperature (4-Bit)
- 17V…32V for High Temperature (4-Bit)
- Negative Charge Pump VGL: –1.8V…–8.1V (6-Bit)
- 6-Ch Gamma Buffer:
- 3-Ch: VDD…HVDD (9-Bit)
- 3-Ch: HVDD...GND (9-Bit)
- 9-Bit VCOM Reference
- 3-Bit VCOM Gain
- VCOM_DAC Output for External Operational Amplifier Reference
- Temperature Compensation for VGH and VCOM
- Reset Signal with Programmable Delay Time
- Programmable Sequencing Delays (4 × 3-Bit)
- Thermal Shutdown
- 12-Channel Level Shifters:
- Supports Forward and Reverse Operation
- Abnormal Operation Detection
- 56-Pin 7-mm × 7-mm QFN Package
| Display type | LCD unipolar |
| IC integration | Gamma buffer, LCD bias, LCD level shifter, VCOM |
| Vin (min) (V) | 8.6 |
| Vin (max) (V) | 15.5 |
| Applications | 13 to 21 inches, 21 inches and above |
| Source driver voltage (min) (V) | 12.7 |
| Source driver voltage (max) (V) | 19 |
| Level shifter/scan driver (Ch) | 12 |
| V_POS (min) (V) | 19 |
| V_POS (max) (V) | 34 |
| V_NEG (min) (V) | -8.1 |
| V_NEG (max) (V) | -1.8 |
| Features | GPM or GVS, Gamma buffer, HAVDD, I2C interface, Level shifter, Reset generator, Temperature sensor or compensation, VCOM or op amp |
| Topology | Boost, Buck |
| Rating | Catalog |
| Operating temperature range (°C) | -40 to 85 |