UCC27212A-Q1 Texas instruments

UCC27212A-Q1

Уточнить цену

UCC27212A-Q1

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The UCC27212A-Q1 device driver is based on the popular UCC27211 MOSFET drivers. In addition, UCC27212A-Q1 offers extended operating range all the way down to 5 V which helps lower power losses.The peak output pullup and pulldown current is 4-A source and 4-A sink, and pullup and pulldown resistance is 0.9 Ω. This allows for the ability to drive large power MOSFETs with minimized switching losses during the transition through the Miller Plateau of the MOSFET.The input structure can directly handle –10 V, which increases robustness and also allows direct interface to gate-drive transformers without using rectification diodes. The inputs are also independent of supply voltage and have a 20-V maximum rating. The switching node of the UCC27212A-Q1 (HS pin) can handle –18-V maximum, which allows the high-side channel to be protected from inherent negative voltages caused by parasitic inductance and stray capacitance. The UCC27212A-Q1 has increased hysteresis that allows for interface to analog or digital PWM controllers with enhanced noise immunity.The low-side and high-side gate drivers are independently controlled and matched to 4 ns between the turn on and turn off of each other.An on-chip 100-V rated bootstrap diode eliminates the external discrete diodes. Undervoltage lockout is provided for both the high-side and the low-side drivers which provides symmetric turn on and turn off behavior and forces the outputs low if the drive voltage is below the specified threshold.

Qualified for Automotive Applications
AECA-Q100 Qualified with the following results:
- Device temperature grade –40°C to +140°C
- Device HBM classification level 2
- Device CDM classification level C6
5-V Turn-off Under Voltage Lockout (UVLO)
Drives Two N-Channel MOSFETs in High-Side and Low-Side Configuration With Independent Inputs
Maximum Boot Voltage 120-V DC
4-A Sink, 4-A Source Output Currents
0.9-Ω Pullup and Pulldown Resistance
Input Pins Can Tolerate –10 V to +20 V and are Independent of Supply Voltage Range
TTL Compatible Inputs
5-V to 17-V VDD Operating Range, (20-V ABS Maximum)
7.2-ns Rise and 5.5-ns Fall Time With 1000-pF Load
Fast Propagation Delay Times (20-ns typical)
4-ns Typical Delay Matching
Available in the SOIC8(Powerpad) package

Bus voltage (max) (V)	120
Power switch	MOSFET
Input VCC (min) (V)	5
Input VCC (max) (V)	17
Peak output current (A)	4
Operating temperature range (°C)	-40 to 140
Undervoltage lockout (typ) (V)	5
Rating	Automotive
Propagation delay time (µs)	0.02
Rise time (ns)	7.2
Fall time (ns)	5.5
Iq (mA)	0.001
Input threshold	TTL
Channel input logic	TTL
Negative voltage handling at HS pin (V)	-20
TI functional safety category	Functional Safety-Capable
Driver configuration	Dual inputs