The THS4524 is a very low-power, fully differential operational amplifier with
rail-to-rail output and an input common-mode range that includes the negative rail. This amplifier
is designed for low-power data acquisition systems and high-density applications where power
dissipation is a critical parameter, and provide exceptional performance in audio
applications.
This fully differential op amp features accurate output common-mode control that allows
for dc-coupling when driving analog-to-digital converters (ADCs). This control, coupled with an
input common-mode range below the negative rail as well as rail-to-rail output, allows for easy
interfacing between single-ended, ground-referenced signal sources. Additionally, the THS4524 is
ideally suited for driving both successive-approximation register (SAR) and delta-sigma (ΔΣ) ADCs
using only a single +2.5-V to +5-V and ground power supply.
The THS4524 fully differential op amp is characterized for operation over the full
industrial temperature range from –55°C to 125°C.
- Fully Differential Architecture
- Bandwidth: 145 MHz
- Slew Rate: 490 V/µs
- HD2: –133 dBc at 10 kHz
(1 VRMS, RL = 1 kΩ) - HD3: –140 dBc at 10 kHz
(1 VRMS, RL = 1 kΩ) - Input Voltage Noise: 4.6 nV/√Hz
(f = 100 kHz) - THD+N: –112dBc (0.00025%) at 1 kHz
(22-kHz BW, G = 1, 5 VPP) - Open-Loop Gain: 119 dB
- NRI—Negative Rail Input
- RRO—Rail-to-Rail Output
- Output Common-Mode Control
(With Low Offset and Drift) - Power Supply:
- Voltage: +2.5 V (±1.25 V)
to +5.5 V (±2.75 V) - Current: 1.14 mA/ch
- Power-Down Capability: 20 µA (Typical)
Supports Defense, Aerospace, and Medical Applications
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Military (–55°C/125°C) Temperature Range(1)
- Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
(1) Additional temperature ranges available - contact factory
All trademarks are the property of their respective owners.
| Number of channels | 4 |
| Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 2.5 |
| Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 5.5 |
| BW at Acl (MHz) | 145 |
| Acl, min spec gain (V/V) | 1 |
| Slew rate (typ) (V/µs) | 490 |
| Architecture | Bipolar, Fully Differential ADC Driver |
| Vn at flatband (typ) (nV√Hz) | 4.6 |
| Iq per channel (typ) (mA) | 1 |
| Rail-to-rail | In to V-, Out |
| Vos (offset voltage at 25°C) (max) (mV) | 8 |
| Operating temperature range (°C) | -55 to 125 |
| Iout (typ) (mA) | 55 |
| 2nd harmonic (dBc) | 122 |
| 3rd harmonic (dBc) | 141 |
| Frequency of harmonic distortion measurement (MHz) | 0.001 |
| GBW (typ) (MHz) | 95 |
| Input bias current (max) (pA) | 900000 |
| Features | Shutdown |
| CMRR (typ) (dB) | 102 |
| Rating | HiRel Enhanced Product |