2N7001T Texas instruments

2N7001T

Уточнить цену

2N7001T

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The 2N7001T is a single-bit buffered voltage signal converter that uses two separate configurable power-supply rails to up or down translate a unidirectional signal. The device is operational with both VCCA and VCCB supplies down to 1.65 V and up to 3.60 V. VCCA defines the input threshold voltage on the A input. VCCB defines the output drive voltage on the B output.This device is fully specified for partial-power-down applications using the Ioff current. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down.The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, the output port (B) enters a high-impedance state.

Up and down translation across 1.65 V to 3.6 V
Operating temperature: –40°C to +125°C
Maximum quiescent current (I_CCA + I_CCB) of 14 µA (125°C maximum)
Up to 100 Mbps support across the full supply range
V_CC isolation feature
- If either V_CCinput is below 100 mV, the output becomes high-impedance
I_off supports partial-power-down mode operation
Latch-up performance exceeds 100 mA per JESD 78, Class II
ESD protection exceeds JESD 22
- 2000-V Human body model
- 1000-V Charged-device model

Technology family	2N
Applications	GPIO
Bits (#)	1
Configuration	1 Ch A to B 0 Ch B to A
High input voltage (min) (V)	1.08
High input voltage (max) (V)	3.6
Vout (min) (V)	0
Vout (max) (V)	3.6
Data rate (max) (MBits)	100
IOH (max) (mA)	-12
IOL (max) (mA)	-12
Supply current (max) (µA)	3.6
Features	.64, 4.2
Input type	Standard CMOS
Output type	Push-Pull
Rating	Catalog
Operating temperature range (°C)	-40 to 125