DLP3034-Q1 Texas instruments

DLP3034-Q1

Уточнить цену

DLP3034-Q1

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The DLP3034-Q1 automotive DMD is primarily targeted for transparent window display applications. This chipset can be coupled with 405-nm illumination sources (e.g. LEDs or lasers) in an optical projection system to project onto windows embedded with emissive phosphor films. When these transparent emissive films are excited with 405-nm light from a DLP3034-Q1 projector, the window becomes a display emitting light in the visible spectrum. In addition, this chipset enables high power optical systems with a wide dynamic range and fast switching speeds that do not vary with temperature.

Automotive qualified
- –40°C to 105°C operating temperature range for DMD array
Supports 405-nm illumination sources
0.3-inch diagonal micromirror array
- 7.6-µm micromirror pitch
- ±12° micromirror tilt angle (relative to flat state)
- Side illumination for optimized efficiency
WVGA (864 × 480) resolution
Polarization independent spatial light modulator
- Compatible with LED or laser light sources
Low-power consumption: 105-mW (typical)
Operating temperature range: –40°C to 105°C
Hermetic package with 2.5°C/W thermal efficiency
JTAG boundary scan to allow in-system validation
Compatible with the DLPC120-Q1 automotive DMD controller
78-MHz DDR DMD interface

Array diagonal (in)	0.3
Display resolution (max)	864 x 480
Component type	DMD
Chipset family	DLP3034-Q1
Rating	Automotive
Input frame rate (max) (Hz)	60
Operating temperature range (°C)	-40 to 105