SN74AXC2T45 Texas instruments

SN74AXC2T45

Уточнить цену

SN74AXC2T45

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The SN74AXC2T45 is a two-bit noninverting bus transceiver that uses two individually configurable power-supply rails. The device is operational with both VCCA and VCCB supplies as low as 0.65 V. The A port is designed to track VCCA, which accepts any supply voltage from 0.65 V to 3.6 V. The B port is designed to track VCCB, which also accepts any supply voltage from 0.65 V to 3.6 V. Additionally the SN74AXC2T45 is compatible with a single-supply system.The SN74AXC2T45 device is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level of the direction-control input (DIR). The SN74AXC2T45 device is designed so the control pin (DIR) is referenced to VCCA.This device is fully specified for partial-power-down applications using the Ioff current. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down.The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, both I/O ports enter a high-impedance state by disabling their outputs.Glitch-free power supply sequencing allows either supply rail to be powered on or off in any order while providing robust power sequencing performance.

Fully configurable dual-rail design allows each port to operate with a power supply range from 0.65 V to 3.6 V
Operating temperature from –40°C to +125°C
Glitch-free power supply sequencing
Up to 380 Mbps support when translating from 1.8 V to 3.3 V
V_CC isolation feature
- If either V_CC input is below 100 mV, all I/Os outputs are disabled and become high-impedance
I_off supports partial-power-down mode operation
Compatible with AVC family level shifters
Latch-up performance exceeds 100 mA per JESD 78, Class II
ESD protection exceeds JESD 22
- 8000-V human-body model
- 1000-V charged-device model

Technology family	AXC
Applications	UART
Bits (#)	2
High input voltage (min) (V)	0.455
High input voltage (max) (V)	3.6
Vout (min) (V)	0.65
Vout (max) (V)	3.6
Data rate (max) (MBits)	380
IOH (max) (mA)	-12
IOL (max) (mA)	12
Supply current (max) (µA)	23
Features	Overvoltage tolerant inputs, Partial power down (Ioff), Vcc isolation
Input type	Standard CMOS
Output type	Push-Pull
Rating	Catalog
Operating temperature range (°C)	-40 to 125