The INA592 device is a low-power, wide bandwidth difference amplifier consisting of a precision operational amplifier (op amp) and a precision resistor network. Excellent tracking of resistors (TCR) maintains gain accuracy and common-mode rejection over temperature. Unique features such as low offset 40 µV (maximum), low offset drift (2 µV/°C maximum) high slew rate (18 V/µs), and high capacitive load drive of up to 500 pF make the INA592 a robust, high-performance difference amplifier for high-voltage industrial applications. The common-mode range of the internal op amp extends to the negative supply, enabling the device to operate in single-supply applications. The device operates on single (4.5 V to 36 V) or dual supplies (±2.25 V to ±18 V).The difference amplifier is the foundation of many commonly used circuits. The INA592 provides this circuit function without using an expensive precision resistor network.
- G = 1/2 amplifier
- G = 2 amplifier
- Low offset voltage: 40 µV (maximum)
- Low offset voltage drift: ±2 µV/°C (maximum)
- Low noise: 18 nV/√Hz at 1 kHz
- Low gain error: ±0.03% (maximum)
- High common-mode rejection: 88 dB (minimum)
- Wide bandwidth: 2 MHz GBW
- Low quiescent current: 1.1 mA per amplifier
- High slew rate: 18 V/µs
- High capacitive load drive capability: 500 pF
- Wide supply range:
- Single supply: 4.5 V to 36 V
- Dual supply: ±2.25 V to ±18 V
- Specified temperature range: –40°C to +125°C
- Packages: 8-Pin MSOP and SOIC, 10-pin VSON
| Number of channels | 1 |
| Vs (min) (V) | 4.5 |
| Vs (max) (V) | 36 |
| CMRR (min) (dB) | 88 |
| Common-mode input low (min) (V) | -54.3 |
| Common-mode input high (max) (V) | 54 |
| Input offset (±) (max) (V) | 0.00004 |
| Iq (typ) (mA) | 1.1 |
| Slew rate (typ) (V/µs) | 18 |
| Voltage gain (min) (V/V) | 0.5 |
| Voltage gain (max) (V/V) | 2 |
| Small-signal bandwidth (typ) (Hz) | 2000000 |
| Rating | Catalog |
| Operating temperature range (°C) | -40 to 125 |
| Gain drift (max) (ppm/°C) | 1 |
| Gain error (±) (max) (%) | 0.03 |