SN74LVC1G175-EP Texas instruments

SN74LVC1G175-EP

Уточнить цену

SN74LVC1G175-EP

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

This single D-type flip-flop is designed for 1.65-V to 5.5-V VCC operation. The SN74LVC1G175 has an asynchronous clear (CLR) input. When CLR is high, data from the input pin (D) is transferred to the output pin (Q) on the clocks (CLK) rising edge. When CLR is low, Q is forced into the low state, regardless of the clock edge or data on D. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

Supports 5-V V_CC Operation
Inputs Accept Voltages to 5.5 V
Max t_pd of 4.3 ns at 3.3 V
Low Power Consumption, 10-µA Max I_CC
±24-mA Output Drive at 3.3 V
I_off Supports Partial Power-Down-Mode Operation
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
APPLICATIONS
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Military (–55°C/125°C)
  Temperature Range⁽¹⁾
- Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability

⁽¹⁾ Additional temperature ranges available - contact factory

Number of channels	1
Technology family	LVC
Supply voltage (min) (V)	1.65
Supply voltage (max) (V)	5.5
Input type	Standard CMOS
Output type	Push-Pull
Clock frequency (max) (MHz)	150
IOL (max) (mA)	32
IOH (max) (mA)	-32
Supply current (max) (µA)	10
Features	Balanced outputs, Over-voltage tolerant inputs, Partial power down (Ioff), Very high speed (tpd 5-10ns)
Operating temperature range (°C)	-55 to 125
Rating	HiRel Enhanced Product