TLV1805 Texas instruments

TLV1805

Уточнить цену

TLV1805

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The TLV1805 high voltage comparator offers the unique combination of wide supply range, push-pull output, rail-to-rail inputs, low quiescent current, shutdown capability and fast output response. All these features make this comparator well-suited for applications that require sensing at the positive or negative voltage rails such as reverse current protection for a smart diode controller, overcurrent sensing, and overvoltage protection circuits where the push-pull output stage is used to drive the gate of a p-channel or n-channel MOSFET switch.The high peak current push-pull output stage, which is unique for high-voltage comparators, offers the advantage of allowing the output to actively drive the load to either supply rail with a fast edge rate. This is especially valuable in applications where a MOSFET gate needs to be driven high or low quickly in order to connect or disconnect a host from an unexpected high voltage supply. Additional features such as low input offset voltage, low input bias currents and High-Z shutdown make the TLV1805 flexible enough to handle a broad range of applications. Power-On reset prevents false outputs at power-up.The TLV1805 is in a 6-pin SOT-23 package and is specified for operation across the extended industrial temperature range of –40°C to +125°C.

3.3 V to 40 V supply range
Low quiescent current: 135 µA
High peak current push-pull output
Rail-to-rail inputs with phase reversal protection
Built-In hysteresis: 14mV
250ns propagation delay
Low input offset voltage: 500 µV
Shutdown with high-z output
Power-On Reset (POR)
SOT-23-6 package

Number of channels	1
Output type	Push-Pull
Propagation delay time (µs)	0.25
Vs (max) (V)	40
Vs (min) (V)	3.3
Vos (offset voltage at 25°C) (max) (mV)	4.5
Iq per channel (typ) (mA)	0.15
Input bias current (±) (max) (nA)	0.5
Rail-to-rail	In
Rating	Catalog
Operating temperature range (°C)	-40 to 125
Features	Hysteresis, Shutdown
VICR (max) (V)	0
VICR (min) (V)	0