REG71055-Q1 Texas instruments

REG71055-Q1

Уточнить цену

REG71055-Q1

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The REG71055 is a switched capacitor voltage converter that produces a regulated, low-ripple output voltage from an unregulated input voltage. Input supply voltage of 3.0 V to 5.5 V makes the REG71055 ideal for a variety of battery sources, such as single-cell Li-Ion, or two- and three-cell nickel- or alkaline-based chemistries. The input voltage may vary below the output voltage and the output remains in regulation. It works equally well for step-up applications without the need for an inductor, providing low EMI dc/dc conversion. The high switching frequency allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG71055 is thermally protected and current limited, protecting the load and the regulator during fault conditions. Typical ground pin current (quiescent current) is 65 µA with no load, and less than 1 µA in shutdown mode.

Qualified for Automotive Applications
Input Voltage Range: 3.0 V to 5.5 V
Automatic Step-Up Operation
Low Input Current Ripple
Low Output Voltage Ripple
Minimum Number of External Components, No Inductors
1-MHz Internal Oscillator Allows Small Capacitors
Shutdown Mode
Thermal and Current Limit Protection
5.5-V Output Voltage
Small TSOT23-6 (DDC) Package

Vin (min) (V)	3
Vin (max) (V)	5.5
Vout (min) (V)	5.5
Vout (max) (V)	5.5
Iout (max) (A)	0.06
Regulated outputs (#)	1
Switching frequency (min) (kHz)	1000
Switching frequency (max) (kHz)	1000
Iq (typ) (mA)	0.065
Features	Enable
Operating temperature range (°C)	-40 to 85
Rating	Automotive
Type	Charge pump