The TLIN1028-Q1 is a local interconnect network (LIN) physical layer transceiver, compliant to LIN 2.2A ISO/DIS 17987–4 standards, with an integrated low dropout (LDO) voltage regulator. This LIN system basis chip (SBC) reduces system complexity by providing a 3.3 V or 5 V rail with up to 70 mA (D) or 125 mA (DRB and DDA) of current to power microprocessors, sensors or other devices. The TLIN1028-Q1 has an optimized current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The TLIN1028-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal. The receiver converts the data stream to logic-level signals that are sent to the microprocessor through the open-drain RXD pin.
- AEC-Q100 (Grade 1): Qualified for automotive applications
- Local interconnect network (LIN) physical layer specification ISO/DIS 17987–4 compliant and conforms to SAE J2602 recommended practice for LIN
- Functional Safety-Capable
- Supports 12-V applications
- Wide operating ranges
- ±58 V LIN bus fault protection
- LDO output supporting 3.3 V or 5 V
- Sleep mode: Ultra-low current consumption allows wake-up event from:
- LIN bus or local wake through EN pin
- Power-up and down glitch-free operation
- Protection features:
- ESD protection, VSUP under-voltage protection
- TXD dominant time out (DTO) protection, Thermal shutdown
- Unpowered node or ground disconnection fail-safe at system level
- VCC sources up to 125 mA with DRB and DDA package
- Available in SOIC (8) and HSOIC (8) packages, and leadless VSON (8) package with improved automated optical inspection (AOI) capability
| Protocols | LIN, SBC |
| Number of channels | 1 |
| Supply voltage (V) | 5.5 to 28 |
| Bus fault voltage (V) | -58 to 58 |
| Signaling rate (max) (MBits) | 0.02 |
| TI functional safety category | Functional Safety-Capable |
| Rating | Automotive |
| Operating temperature range (°C) | -40 to 125 |
| Low-power mode | Sleep |
| Isolated | No |