BQ27741-G1 Texas instruments

BQ27741-G1

Уточнить цену

BQ27741-G1

Уточнить цену

СРАВНИТЬ

В СРАВНЕНИИ

Уточнить цену

Описание

The Texas Instruments bq27741-G1 Li-Ion battery fuel gauge is a microcontroller peripheral that provides fuel gauging for single-cell Li-Ion battery packs. The device requires little system microcontroller firmware development for accurate battery fuel gauging. The fuel gauge resides within the battery pack or on the system’s main board with an embedded battery (non-removable). The fuel gauge provides hardware-based over- and undervoltage, overcurrent in charge or discharge, and short-circuit protections. The fuel gauge uses the patented Impedance Track™ algorithm for fuel gauging, and provides information such as remaining battery capacity (mAh), state-of-charge (%), run-time to empty (minimum), battery voltage (mV), and temperature (°C), as well as recording vital parameters throughout the lifetime of the battery. The device comes in a 15-ball BGA package (2.776 mm × 1.96 mm) that is ideal for space-constrained applications.

Battery Fuel Gauge and Protector for 1-Series Li-
Ion Applications
Microcontroller Peripheral Provides:
- Accurate Battery Fuel Gauging Supports up to
  14,500 mAh
- External and Internal Temperature Sensors for
  Battery Temperature Reporting
- Precision 16-Bit High-Side Coulomb Counter
  with High-Side Low-Value Sense Resistor
  (5 mΩ to 20 mΩ)
- Lifetime and Current Data Logging
- 64 Bytes of Non-Volatile Scratch Pad Flash
- SHA-1/HMAC Authentication
Battery Fuel Gauging Based on Patented
Impedance Track7trade; Technology
- Models Battery Discharge Curve for Accurate
  Time-To-Empty Predictions
- Automatically Adjusts for Aging, Self-
  Discharge, and Temperature- and Rate-
  Induced Effects on Battery
Advanced Fuel Gauging Features
- Internal Short Detection
- Tab Disconnection Detection
Safety and Protection:
- Over- and Undervoltage Protection with Low-
  Power Mode
- Overcharging and Discharging Current
  Protection
- Overtemperature Protection
- Short-Circuit Protection
- Low-Voltage Notification
- Voltage Doubler to Support High-Side
  N-Channel FET Protection
HDQ and I²C Interface Formats for
Communication with Host System
Small 15-Ball NanoFree™ (BGA) Packaging

Cell chemistry	Li-Ion/Li-Polymer
Number of series cells	Single Cell
Communication interface	HDQ, I2C
Battery capacity (min) (mAh)	500
Battery capacity (max) (mAh)	16000
Implementation	Pack
External capacity indication	None
Features	Impedance Track™ algorithm, Integrated Protector, SHA-1 Authentication
Operating temperature range (°C)	-40 to 85
Rating	Catalog